RESET THE PRINTER

Turn the printer off, wait about 10 seconds, and then turn the printer on.

Flash memory card

Make sure the flash memory card is securely connected to the printer system board.
Solving paper feed problems

Paper frequently jams

These are possible solutions. Try one or more of the following:
CHECK THE PAPER
Use recommended paper and other specialty media. For more information, see “Paper and specialty media
guidelines” on page 55.

MAKE SURE THERE IS NOT TOO MUCH PAPER IN THE TRAY OR FEEDER

Make sure the stack of paper you load does not exceed the maximum stack height indicated in the tray or on the
multipurpose feeder.
CHECK THE GUIDES
Move the guides in the tray to the correct positions f or the paper size loaded.

THE PAPER ABSORBED MOISTURE DUE TO HIGH HUMIDITY

Load paper from a fresh package.
Store paper in its original wrapper until you use it.

Paper jam message remains after jam i s cleared

The paper path is not clear. Clear jammed paper from the ent ire paper path, and then press .

Page that jammed does not reprint af ter you clear the jam

In the Settings menu, Jam Recovery is set to Off. Set Jam Recovery to Auto or On:
1Press .
2Press the arrow button s until Settings appears, and then press .
3Press the arrow button s until General Settings appears, and then press .
4Press the arrow button s until Print Reco very appears, and then press .
5Press the arrow button s until Jam Recove ry appears, and then press .
6Press the arrow button s until On or Auto appears, and then press .
Troubleshooting
197