Lexmark Z2400 Series manual Product power consumption, Power Saver, Off mode

Storage temperature

1–60° C (34–140° F)

ENERGY STAR

Power consumption

Product power consumption

The following table documents the power consumption characteristics of the product.

Note: Some modes may not apply to your product.

Mode	Description	Power consumption (Watts)
Printing	The product is generating hard-copy output from electronic inputs.	15
Copying	The product is generating hard-copy output from hard-copy original	not applicable
	documents.
Scanning	The product is scanning hard-copy documents.	not applicable
Ready	The product is waiting for a print job.	6.8
Power Saver	The product is in energy-saving mode.	5.6
Off	The product is plugged into a wall outlet, but the power switch is	0.9
	turned off.

The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be substantially higher than the average.

Values are subject to change. See www.lexmark.com for current values.

Power Saver

This product is designed with an energy-saving mode called Power Saver. The Power Saver Mode is equivalent to the EPA Sleep Mode. The Power Saver Mode saves energy by lowering power consumption during extended periods of inactivity. The Power Saver Mode is automatically engaged after this product is not used for a specified period of time, called the Power Saver Timeout.

Factory default Power Saver Timeout for this product (in minutes):

30 minutes

Off mode

If this product has an off mode which still consumes a small amount of power, then to completely stop product power consumption, disconnect the power supply cord from the wall outlet.

78