Lightwave Communications 3200 user manual

sys admin>>CONNECTIONS
Terminal Connection List
01	KEVIN	01	SERVER	( Monitor mode )
02		00		( Channel present )
03		00		( Channel present )
04		00		( Channel present )
05		00		( Channel present )
06		00		( Channel present )
07		00		( Channel present )
08		00		( Channel present )
09		00		( Channel present )
10		00		( Channel present )
11		00		( Channel present )
12		00		( Channel present )
13		00		( Channel present )
14		00		( Channel present )
15		00		( Channel present )
16		00		( Channel present )
17	<not installed>

sys admin>>

The above example shows that user KEVIN is logged in on terminal port 01, is connected to device port 01 (which is named "Server" in the ConsoleServer 3200), and is in monitor mode. The list will display the user ID of any logged-in users, the device port to which they are connected, the device name assigned to that port, and the mode of that connection (see sections 7.8, 7.9, and 7.10 for an explanation of the various connection modes). If the user is not connected to any device, they shall simply be listed as "User Logged-In".

When used with the /MONITOR command line qualifier, the CONNECTIONS command updates the connection list on screen every time a user logs in or out or changes login level (i.e., goes into direct mode), rather than simply displaying the list once as occurs when the CONNECTIONS command is used alone. (See section 6.8, Sys Admin Session Management Commands).

The CONNECTIONS command will also tell the sys admin which terminal ports are present (in the list, they are referred to as "channels"). If the port is not functioning (i.e., the card is not present or there is a fault with the individual port), the port will be listed as "<not installed>". It will also list Telnet Active for an active Telnet session.

33