PULSE WAVE SHAPING PRINCIPLES | Appendix A |
7. Adjust the End Condition Parameters (Optional)
The end condition parameters can be adjusted to define how the welding machine will respond at the end of a weld application.
To view the end condition window, click on the 
button on the Waveform Editor screen. Adjust the end condition parameters to accommodate your welding application and per the following parameter descriptions.
END AMPS
END
TIME
End Conditioning
End Conditioning
For Wire Feed Speed 50
End Amp 550.0
End Time 2.5
Amp * Time 1375.0
27850037
End amps: Adjust this parameter to establish the peak amperage of the wire conditioning pulse. The wire conditioning pulse knocks the last weld droplet from the electrode at the end of a weld.
End time: Adjust this parameter to set the duration of the ending pulse.
Amp • Time: This parameter indicates the power of the ending pulse.
WAVE DESIGNER
