10/100/1000 4-Port VPN Router
Connection Instructions
1.Before you begin, make sure that all of your hardware is powered off, including the Router, PCs, hubs, switches, and cable or DSL modem.
2.Connect one end of an Ethernet network cable to one of the numbered ports on the front of the Router. Connect the other end to an Ethernet port on a network device, e.g., a PC, print server, hub, or switch.
Repeat this step to connect more PCs or other network devices to the Router.
3.Connect your cable or DSL modem’s Ethernet cable to the Router’s Internet port.
4.Power on the cable or DSL modem and the other network device if using one.
5.Connect the included power cord to the Router’s Power port on the back of the Router, and plug the power cord into an electrical outlet.
The System LED on the front panel will light up as soon as the power adapter is connected properly.
If you need to configure your PCs, proceed to “Appendix F: Windows Help.” Otherwise, proceed to
“Chapter 5: Setting Up and Configuring the Router.”
Chapter 4: Connecting the Router
Hardware: the physical aspect of computers, telecommunications, and other information technology devices
11
Connection Instructions
