Linksys RV0041 manual For Windows XP

10/100/1000 4-Port VPN Router

For Windows 2000:

A.Click Start, Settings, and Control Panel. Double-click Network and Dial-Up Connections.

B.Right-click the Local Area Connection that is associated with the Ethernet adapter you are using, and select the Properties option.

C.In the Components checked are used by this connection box, highlight Internet Protocol (TCP/IP), and click the Properties button. Select Use the following IP address option.

D.Enter a unique IP address that is not used by any other computer on the network connected to the Router. You can only use an IP address in the ranges 192.168.1.2 to 192.168.1.99 and 192.168.1.151 to 192.168.1.254.

E.Enter the Subnet Mask, 255.255.255.0.

F.Enter the Default Gateway, 192.168.1.1 (Router’s default IP address).

G.Toward the bottom of the window, select Use the following DNS server addresses, and enter the Preferred DNS server and Alternative DNS server (provided by your ISP). Contact your ISP or go on its website to find the information.

H.Click the OK button in the Internet Protocol (TCP/IP) Properties window, and click the OK button in the Local Area Connection Properties window.

I.Restart the computer if asked.

For Windows XP:

The following instructions assume you are running Windows XP with the default interface. If you are using the Classic interface (where the icons and menus look like previous Windows versions), please follow the instructions for Windows 2000.

A.Click Start and Control Panel.

B.Click the Network and Internet Connections icon and then the Network Connections icon.

C.Right-click the Local Area Connection that is associated with the Ethernet adapter you are using, and select the Properties option.

D.In the This connection uses the following items box, highlight Internet Protocol (TCP/IP). Click the Properties button.

E.Enter a unique IP address that is not used by any other computer on the network connected to the Router. You can only use an IP address in the ranges 192.168.1.2 to 192.168.1.99 and 192.168.1.151 to 192.168.1.254.

F.Enter the Subnet Mask, 255.255.255.0.

G.Enter the Default Gateway, 192.168.1.1 (Router’s default IP address).

H.Toward the bottom of the window, select Use the following DNS server addresses, and enter the Preferred DNS server and Alternative DNS server (provided by your ISP). Contact your ISP or go on its website to find the information.

I.Click the OK button in the Internet Protocol (TCP/IP) Properties window. Click the OK button in the Local Area Connection Properties window.

Appendix A: Troubleshooting 62

Common Problems and Solutions