Linksys RV0041 manual Basic Setup Wizard Selecting WAN Connection Types

10/100/1000 4-Port VPN Router

4.You will now need to set up the connection types for the WAN ports. These WAN Connection Types were shown in Figures 5-6 through 5-11, and can be referred back to for help.

If you chose Obtain an IP automatically, select Use DNS Server provided by ISP (default) or Use the Following DNS Server Addresses, if you want to enter a specific IP. Click Next to continue. Click Previous if you want to return to the previous screen. Click Exit if you want to exit the wizard.

If you chose Static IP, enter the Static IP, Subnet Mask, and Default Gateway provided by your ISP. Click Next to continue. Click Previous if you want to return to the previous screen. Click Exit if you want to exit the wizard.

If you chose PPPoE, enter the User Name and Password provided by your ISP. Click Next to continue. Click Previous if you want to return to the previous screen. Click Exit if you want to exit the wizard.

5.At the final screen, click Save Settings if you are satisfied with all of your settings. Click Previous if you want to return to the previous screen. Click Exit if you want to exit the wizard.

Figure 5-55: Basic Setup Wizard -

Selecting WAN Connection Types

Figure 5-56: Basic Setup Wizard - Save Settings

Chapter 5: Setting Up and Configuring the Router 56

Wizard Tab