10/100/1000 4-Port VPN Router
Chapter 3: Getting to Know the Router
The Front Panel
The Router’s LEDs, ports, and Reset button are located on the front panel of the Router.
|
| LAN | WAN | SFP | |
|
| Figure |
|
|
|
Ports |
|
|
|
|
|
| These four Gigabit (10/100/1000) ports connect to network devices, such as PCs, | ||||
| print servers, or additional switches. |
|
|
| |
10/100 (WAN) | The 10/100 port connects to a cable or DSL modem. |
|
| ||
SFP | The SFP (Small Fiber Pluggable) port can be used to connect a 10/100 network, | ||||
| through either a hub or switch. |
|
|
| |
|
|
|
| ||
|
| NOTE: The WAN and SFP ports cannot be used at the same time. One one of | |||
|
| these port may be used at a time. |
|
|
|
LEDs |
|
|
|
|
|
|
|
|
|
| |
Diag | Orange. The Diag LED lights up when the system is not ready. The LED goes off when | ||||
| the system is ready. |
|
|
| |
System | Green. The System LED lights up when the Router is powered on. If the LED is flashing, | ||||
| the Router is running a diagnostic test. |
|
|
| |
Chapter 3: Getting to Know the Router |
| 8 | |||
The Front Panel
