10/100/1000 4-Port VPN Router
Setup Tab - Password
The Router's default User Name and Password is admin. For greater network security, you should change the Router's password from this default. If you leave the password field blank, all users on your network will be able to access the Router simply by entering admin into the password field.
Old Password: Enter the old password.
NOTE: The password cannot be recovered if it is lost or forgotten. If the password is lost or forgotten, you have to reset the Router to its factory default settings.
New Password: Enter a new password for the Router. Your password must be less than 64 alphanumeric characters long and it can’t contain any spaces.
Confirm New Password:
Click the Save Settings button to save the Password settings or click the Cancel Changes button to undo the changes.
Setup Tab - Time
Time
The Router uses the time settings to time stamp log events, to automatically update the Content Filter List, and to synchronize time on your networked devices.
Set the local time with Set the local time using Network Time Protocol (NTP) automatically or Set the local time Manually. When you choose to have the time set by using Network Time Protocol, the Router will automatically connect to the NTP server whose address is input, providing the correct time.
Automatic: Select the Time Zone and enter the Daylight Saving and NTP Server. The default Time Zone is Pacific Time.
Manual: Enter the Hours, Minutes, Seconds, Month, Day and Year.
Click the Save Settings button to save the Time settings or click the Cancel Changes button to undo the changes.
Chapter 5: Setting Up and Configuring the Router
Figure 5-10: Setup Tab - Password
Figure 5-11: Setup Tab - Time
20
Setup Tab - Password
