Linksys RV0041 manual VPN Setting Status, Log Setting Status

10/100/1000 4-Port VPN Router

VPN Setting Status

VPN Summary: This hyperlink will take you to the Summary page of the VPN Tab.

Tunnel(s) Used: This displays the amount of VPN Tunnels used.

Tunnel(s) Available: This displays the amount of VPN Tunnels available.

Current Connected (The Group Name of GroupVPN) users: This displays the amount of VPN users connected via GroupVPN.

(If GroupVPN is disabled, it will show “No Group VPN was defined.”)

Log Setting Status:

This hyperlink will take you to the System Log page of the Log Tab.

If you have not set up the Log’s mail server, this will show “E-mail cannot be sent because you have not specified an outbound SMTP server address.”

If you have set up the mail server but the log has not come out due to Log Queue Length and Log Time Threshold settings, this will show “E-mail settings have been configured.”

If you have set up the mail server and the log has been sent to the mail server, this will show “E-mail settings have been configured and sent out normally.”

If you have set up the mail server and the log cannot be sent to mail server successfully, this will show “E-mail cannot be sent out, probably use incorrect settings.”

Chapter 5: Setting Up and Configuring the Router 17

System Summary Tab