Recommended Tips for System Setup - Appendix #5

Backing up your System Configurations

it is recommended to back up your system configurations to a Memory Stick. Configuring your system to meet your specific needs can be time consuming - having a backup of your settings will allow you to reset your unit with your personalized settings in the event of an unwanted change.

1.Enter MENU mode by pressing the MENU button on the front panel of the system, remote control or mouse menu. Select the SYSTEM SETUP Option.

2.Select the SYSTEM MANAGEMENT menu from the MAIN menu. Navigate using the up and down arrows on the front panel (or remote control). Highlight the selection in Green, and press the ENTER button to enter the SYSTEM MANAGEMENT Menu.

3.Navigate to the System Data option - the System settings can be saved to a USB memory stick:

•Insert the Memory stick into the System and select the Save option to save settings:

zA Success message indicates that the backup was completed.

zIf the device is not detected, a message will indicate that No storage device was found.

•To load your User Settings, Insert the Memory stick into the System and select the Load option to restore settings.

•System Backup is recommended after initial setup and installation is complete.

NOTE: Make sure to store your USB Memory stick in a safe place.

TIP: The USB Backup is an effective way to configure multiple systems. Using the backup file, you can make sure that all systems are configured in the same way at all locations.

101