Display Menu

Display Menu

The Display Menu controls:

OSD - Onscreen display settings control the camera titles, event indicators, and general screen settings.

MONITOR - Display settings for Alarm and Events

SEQUENCE - Controls the settings for the display of video images in Sequence Mode

SPOT-OUT- Sends camera video to a secondary monitor (by individual camera based on the settings) through the SPOT-OUT Port.

SCREENSAVER - Configuration for the system screensaver

OSD (Onscreen Display)

OSD (Onscreen Display)

• Status Bar - Turns the status bar ON/ OFF. The status bar displays:

zRecording State (Recording: Red, Pre-recording: Green)

zNetwork Indicators

zTime and Date

z% HDD Free

zRefer to Recording Settings on page 50).

•Camera Title - Turns the display of the Camera Titles ON/OFF.

•Event Icon - Turns the Event Icon display ON/OFF.

•Border - Turns the channel separation border ON/OFF when the display is in Quad Display Mode.

•Border Color - Sets the Border Color: White, Blue, Red, Yellow, Green or Gray.

•Menu Transparency - Sets the Menu Transparency between 0 (no transparency, menu is very dark) to 100 (full transparency, menu is very light).

•Motion Sensor Display - Turns the display of the Motion Sensor to:

zActive: Display motion sensor of motion detection area.

zInactive: Display motion sensor except motion detection area.

zOff: No display of motion sensor.

•Motion Sensor Color - Sets the motion sensor color. When Motion is detected on a channel, the moving parts of the image will be highlighted with colored squares (i.e. Blue Squares). Colors include Blue, Green, Red or Yellow.

•Motion Transparency - Setup motion

transparency. This sets the transparency of the Motion Sensor blocks from 0~3.

•Language - Change the language for the On Screen Display and DVR Menu selections to English, French or Spanish.

30