System Menu

Factory Defaults

The System can be returned to the Factory default settings:

•Select the ‘Factory Defaults’ option by selecting the PRESS button.

•Choose OK to reset the unit, or CANCEL to exit without resetting.

NOTE: If the System is reset to Factory Defaults, all settings will be lost (except the Date and Time).

System Data

The System settings can be saved to a USB memory stick:

•Insert the Memory stick into the System and select the Save option to save

settings:

zA Success message indicates that the backup was completed.

zIf the device is not detected, a message will indicate that No storage device was found.

•Insert the Memory stick into the System and select the Load option to restore settings.

This is recommended after initial setup and installation is complete.CONTROL DEVICE

Used with an external control device (not included with the system):

•System ID - Select system ID. (1~254). This is used to set a different ID number to the System (if used, reset the Remote Control ID to match the system ID).

•Protocol - Select protocol (from the Device user Manual).

•Baud rate - Setup baud rate (from the Device user Manual).

44