Advanced Recording

Alarm Schedule

Sets the Alarm Recording for each channel (by hour). Select single or multiple time blocks:

•Mouse Control: Click a single block to open the Recording Type Menu. Click and Drag a block of times to turn Alarm Recording ON or OFF.

•Remote Control & Front Panel: Navigate to the Channel Block section, and the entire block will be highlighted

with a White outline:

zPress the ENTER button to access the Time Blocks - the first hour on Channel 1 will be highlighted in Yellow.

zNavigate to the desired time block, and press the ENTER button to activate the block - if a single block is desired, press ENTER a second time.

zTo select multiple blocks, use the arrows to drag the cursor until the desired time blocks are selected and press the ENTER key.

zAlarm Recording will be turned ON or OFF.

Once the settings have been adjusted for the hour(s), the changed time block(s) will be shown based on the legend:

Legend:

• None

• Alarm

Saving the Settings

You will be prompted to save the settings when exiting a window (when changes have been made)

Click on OK to save the settings, or CANCEL to exit without saving.

55