Setting up Motion Recording - Appendix #9

7.The Schedule Window will be displayed, with the Motion Time blocks displayed as highlighted boxes.

8.Press the Return Button several times to exit the Recording Menus. Remember to SAVE YOUR CHANGES!

To check if the unit is recording in Motion, all channels should have a green box on the top right hand corner. When motion is picked up it will change to a red box with a yellow M.

Continuous & Motion

This system has an Advanced Recording Feature where BOTH Continuous and Motion can be set to ON at the same time:

•The system will record continuously, but when motion is detected the system will display a M recording type on the relevant channel.

•The event will be logged as Motion in the system archive.

•This is useful in situations where you want to have continuous recording, but wish to have Motion detected for easier event searching.

•In addition, an e-mail notification can be sent when Motion has been detected.

108