Hard Drive Replacement - Appendix #11

Hard Drive Replacement - Appendix #11

The System comes with a pre-installed Hard Drive, however the unit will work with a replacement single Hard Drive (up to 750GB).

NOTE: Make sure that the System is OFF and the power cable has been disconnected before changing the Hard Drive.

Setting the New Drive to Master

•Refer to the General Jumper Pin Setting on HDD Surface (generally located on a sticker on the top of the drive).

•Set the Jumper Pin Set to Master (1 Drive).

Connecting the SATA Cable

•Confirm the SATA Cable is securely connected within the System.

•Connect the SATA Data Cable to the Drive

•Connect the SATA Power Cable to the Drive.

111