Setting up Remote Viewing - Appendix #3

Adding a Site (Individual Unit Configuration)

DVR Information - Enter

the information specific to the unit (refer to page 30 for setup instructions):

•Name - Enter a name for the unit.

•IP / Domain Name - Enter the IP address or Domain Name for the System. This will vary

depending on setup

(Internal Network Connection or External Remote access through the Internet)- refer to page 30 for setup details.

•Port - Set to 6100 by default.

•User ID - Enter the USER

ID to connect to the system

 

 

 

 

 

(the USER ID is configured

 

 

 

 

 

on the System - i.e. ADMIN

 

 

 

 

 

- case sensitive).

 

 

 

 

 

 

 

Camera Assign

- Set

ADD Button - Adds the

•

Password

-

The

password used to access

each camera to a portion

site to the Group.

the

System

(i.e.

The

of the 9-view window by

OK Button - Accepts the

ADMIN password is set to

using the drop

down

changes and Closes the

1234 by default).

 

 

menu selections.

 

configuration Window

 

 

 

 

 

NOTE: When entering the information for the IP / DOMAIN NAME:

•If you are connecting from within your network (i.e. The System and your PC are both inside your house), you only need to enter the IP address of the System into the software (i.e. 192.168.0.105)

•If you are connecting from outside your network (i.e. The System is at Home, and your PC is at work), use the DDNS Domain Name to configure the software).

89