Event / Sensor

Event / Sensor

The Event Sensor Setting controls contain:

HDD EVENT - Checks the Hard Drive for errors.

ALARM IN - Configuration settings for an external Alarm sensor (i.e. Door / Window Sensors).

ALARM OUT - Sends a signal to an external device when an alarm is detected.

BUZZER OUT - Turns the audible Buzzer ON/OFF for selected event types.

E-MAIL NOTIFICATION - Sends and E-Mail notification when a selected event occurs (based on User Configuration settings).

HDD EVENT

HDD EVENT

•Smart Alarm - Sets the Smart Alarm ON/ OFF. An alarm occurs when errors are detected with the drive.

•Check Interval - Sets the Hard Drive check interval (1~24 hrs). This setting allows the System to self-check the drive for any errors, and generate an Alarm if drive errors are found.

ALARM INPUT

Configurations for any external alarm device (i.e. a Door or Window Sensor).

•Operation - Sets the Alarm Sensor Connection Status (Enable / Disable) for an external alarm (i.e. Door or Window Sensors). Refer to the appendices for details.

•Type: Sets the Alarm Sensor type to N/ O (Normally Open) or N/C (Normally Closed).

45