Connecting PTZ Cameras - Appendix #14

Connecting PTZ Cameras - Appendix #14

PTZ Cameras (not included with this system) can be connected to the PTZ Control Block on the back panel of the System. The PTZ Controls are enabled through the Menu system on the System. Additional PTZ Cameras are available at http://www.lorexcctv.com

Installing a PTZ (RS-485 Type) PTZ Camera:

1.Connect the Transmit Cable to the D+ port on the PTZ Control Block on the System.

2.Connect the Receive Cable to the D- port on the PTZ Control Block on the System.

3.Connect the Camera to a BNC Channel.

4.Configure PTZ Menu options. The PTZ Camera Settings will depend on the Type of Camera - refer to the specific Camera Manual for your brand and model of PTZ Camera.

Installing a PTZ (RS-232 Type) PTZ Camera:

1.Connect the Transmit Cable to the TX port on the RS-232 Block on the System.

2.Connect the Receive Cable to the RX port on the RS-232 Block on the System.

3.Connect the Camera to a BNC Channel.

4.Configure PTZ Menu options. The PTZ Camera Settings will depend on the Type of Camera - refer to the specific Camera Manual for your brand and model of PTZ Camera.

SYSTEM

PTZ CAMERA (Not Included)

115