Recording Menu Controls

Recording Menu Controls

• Enter the RECORDING MENU screen by:

zPressing the SETUP button on the Remote Control

zPressing the SETUP button on the front panel, or

zSelecting the SETUP option from the On-Screen Menu.

Enter the password if required using the Virtual Keyboard.

• Select the RECORD MENU option.

•To enter a sub-menu, navigate to the option and press the ENTER button. To exit a SUBMENU, press the RETURN button.

•To exit the MAIN MENU, press the RETURN button.

NOTE: When configuring the Recording Settings, it is recommended that you use the Mouse or Remote Control for navigation.

Alternatively, you can use the Client Software provided with this system to change the System Settings and Recording Configurations remotely. Please refer to the Client Software Manual for details.

Simple and Advanced Modes

This System allows you to configure the Recording Options in two ways:

•Simple Recording: Simple recording will set all cameras to behave in the same way, with the same resolution and FPS. In Simple Recording, the recording type can be set to either Continuous, Motion, Alarm or None.

•Advanced Recording: Advanced recording will allow you to configure each camera to behave in a different way, based on quality, FPS and resolution. In Advanced Recording, the menus are separated so that you can set each camera to record in Continuous, Motion and Alarm at the same time.

For example, set the system to record in Continuous, Motion and Alarm at the same time. A camera will be in continuous recording, however when a Motion or Alarm event is detected, the onscreen indicator will switch to M or A, and the event will be logged in the system.

To switch between Recording Modes, change the Recording Mode setting on the

RECORDING OPERATION tab to either

Simple or Advanced.

49