Advanced Recording

Advanced Recording

Alarm Setup Mode

The Alarm Setup section controls the Recording settings for each camera individually (quality, resolution, frame rate and audio). Recording Settings for external alarm detection are set in this menu.

•PARAMETER MODE - Contains the general recording parameters for each camera.

•SCHEDULE MODE - Contains the schedule recording settings for each camera.

Alarm Parameter

Parameters for each camera are set by hour using the Time Interval bar. Hours can be selected individually or in groups (by clicking and dragging several blocks).

NOTE: If Schedule Mode was set to Weekly earlier, a day selection option is available.

Alarm Parameter

Select an Hour (highlighted in ORANGE), and press ENTER again to open the Camera Settings for the selected hour, or select multiple blocks in a row and press

ENTER.

Selected Block of Hours

Once a time block or several blocks have been selected, the Channel Setup window is displayed.

•Size - Sets the video capture size for each camera to 352x240, 704x240 or 704x480.

•FPS - Sets the Frames Per Second for recording for each channel. Each channel can be set to 1, 2, 3, 7, 15 or 30 Frames per second (real time video capture) from a shared pool of 240 FPS. If the FPS drops below 0, the settings will not be saved.

•Quality - Sets the video recording quality to Low, Standard, High or Highest.

•Audio - Turns audio recording ON/OFF for 4 channels ONLY.

Once settings have been adjusted for the hour, the changed time block will be displayed in a different color on the Time Interval bar.

NOTE: Each different configuration will be displayed as a different color on the bar.

54