Using the Storage Calculator - Appendix #10
Using the Storage Calculator - Appendix #10
The Storage Calculator application is used to calculate the amount of recording time available on your Hard Drive, based on the System Recording Settings. This application is located on the Software Installation CD (provided with your System)
1.Select the settings to reflect the options you have chosen on your System:
CH1~CH8 - Select the channels to include in the Recording Calculation
Resolution - Set the recording Resolution to CIF (352x240), 2CIF (704x240) or D1 (704x480)
Quality - Set the recording Quality to Low, Standard, High or Highest.
FPS - Set the Frames Per Second for the recording to 1, 2, 4, 8, 15 or 30 FPS.
AUDIO - Set the Audio Recording selection to ON or OFF (if audio is being recorded on the system).
HDD Size - Select the size of the System Hard Drive (160 GB installed HDD is included with this System).
2.Press the CALCULATE button. The Software will use all configurations to provide recording data specific to your System.
Main Screen - The Software loads with the following defaults selected. Use the dropdown selections to change the options to reflect your System settings.
Example of Recording Time Calculations
110