Component Mode (Mode 3)

Component Mode (Mode 3)

Component Mode is used to display a device connected to the Component green, blue, and red inputs (Y/Pb/Pr) in high resolution (i.e. DVD Player, Set Top Box or Satellite Receiver). The Audio from the Component Device is connected to the Red and White audio inputs located to the right of the Component inputs.

To view a DVD Player using the Monitor:

1.Connect the DVD Player to the Monitor using a Component Cable.

NOTE: Component Cables are not included with the system.

2.Switch the Monitor to Component Mode using the Multi Function Mode button on the front of the Monitor, or by pressing the Component Button on the Remote Control.

NOTE: Press the PIP button to display the DVR in the bottom right corner.

Setting Component (Component Mode) On Your DVD Player

Before using a DVD Player on the Component inputs of the Monitor, it is important to confirm that the DVD Player to be used has Component Outputs. Please refer to the manual for your DVD Player for details on activating the Component Mode.

NOTE: If the Component mode is not activated, you will see a color distortion (i.e. Pink colored screen). Your DVD Player Manual or menus may also refer to Component mode as ‘Composite Mode’ - these are the same function.

63