VGA Mode (Mode 2)

VGA Mode (Mode 2)

VGA Mode is used to display a device (i.e. a Computer) connected to the VGA Port on the monitor.

To view a Computer using the Monitor:

1.Connect the PC to the Monitor using a VGA Cable.

NOTE: VGA Cable is not included with the system.

2. Switch the Monitor to VGA mode using the Multi-Function Mode Button on the front of the Monitor, or by pressing the VGA Button on the Remote Control.

NOTE: Press the PIP button to display the DVR in the bottom right corner.

VGA Connection Errors

If the Computer is not correctly connected to the Monitor, several different error messages may be displayed:

Cable Not Connected: Indicates that the VGA cable has not been securely fastened to either the Monitor or PC.

No Sync or Signal: Indicates that the PC is not sending a good signal. Try changing modes on the PC.

Going to Sleep: Indicates that the Monitor is not receiving a signal from the PC, and is going into hibernation. This does not affect the DVR functions.

61