Display Menu

MONITOR

 

SEQUENCE

 

 

 

 

 

 

•Sequence Dwell - Sets the cycle time when the system is in Sequence Mode (between 1~60 seconds).

•Spot-Out Dwell -The length of time to display a camera in Spot-out mode.

•De-Interlace Mode - Removes the screen spread when set to ON.

•Alarm Pop-Up Mode - Set to ON/OFF. Switches the screen display to the detected channel when an Alarm is activated.

•Alarm Pop-Up Dwell - Determines the length of time that a channel is displayed when an Alarm is detected (between 1~60 seconds).

•Motion Pop-Up Mode - Set to ON/OFF. Switches the screen display to any channel when Motion is detected.

•Motion Pop-Up Dwell - Determines the length of time that a channel is displayed when Motion is detected (between 1~60 seconds).

•Aspect Ratio - Sets the Aspect Ratio for the display to 4:3 (Letterbox) or 16:9 (Full Screen)

16:9 Ratio

4:3 Ratio

Sets the Sequence Mode for the display of available channels. The Sequence Settings for camera views can only be changed using the Mouse or Remote Control.

•Activation - Turns the Sequence ON/ OFF.

NOTE: Up to 16 different Sequence Mode settings can be configured, however only ONE can be active at a time.

• List - Displays the Sequence Title

• ADD Button - Select the ADD button to create a New Sequence:

zSequence Title - Enter a title for the New Sequence

zActivation - Turn the Sequence ON/ OFF (only one sequence can be active at a time).

zCANCEL Button - Cancels the addition of the New Sequence.

zSAVE Button - Saves the New Sequence, and moves to the New Sequence Configuration screen:

31