Simple Recording Mode
Simple Recording Mode
Select a single or multiple time blocks:
•Mouse Control: Click a single block to open the Recording Type Menu. Click and Drag a block of times to configure multiple channels and times at once.
•Remote Control & Front Panel: Navigate to the Channel Block section, and the entire block will be highlighted
with a White outline:
zPress the ENTER button to access the Time Blocks - the first hour on Channel 1 will be highlighted in Yellow.
zNavigate to the desired time block, and press the ENTER button to activate the block - if a single block is desired, press ENTER a second time.
zTo select multiple blocks, use the arrows to drag the cursor until the desired time blocks are selected and press the ENTER key.
The Recording Selection menu will open. Select ONE of:
•None
•Continuous Recording
•Motion Recording
•Alarm Recording
Once a selection has been made, the Recording Selection window will close.
Advanced Recording
Recording Operation
The Recording Operation Menu allows the user to switch between Simple and Advanced Modes, set the Recording Schedule, and change the Pre and Post Event Recording times.
•RECORDING MODE - Changes the Recording mode from Simple to Advanced.•SCHEDULE MODE- Sets the Scheduled Recording Mode to Daily or Weekly:
zIf you set the Schedule Mode to Daily, all settings made to the Continuous/Motion & Alarm Setup menus will affect all days in the same way.
zIf you set the Schedule Mode to Weekly, the settings can be set differently for each day of the week.
•PRE EVENT RECORDING - When an alarm is detected, the Pre Alarm will begin recording before the Alarm was detected (retrieved from video cache). The Pre Alarm Recording Time can be set to between 1~5 seconds.
•POST EVENT RECORDING - When an alarm is detected, the Post Alarm will remain recording for the specified time. The Post Alarm Recording Time can be set to between 5~180 seconds.
51