Initial Filter Cartridge Installation

1.Twist the cap of the filter bypass 1/4 turn counter- clockwise (as viewed from the bottom) so the ears on the plug can disengage. Remove the filter bypass from the filter head apparatus.

Do Not dispose of this filter bypass. It should be stored for future use, in the event that you choose to use the water and ice dispenser without a filter.

2.Carefully remove the filter from its packaging.

3.Apply the month sticker to the cartridge as a reminder to replace the filter when recommended.

4.Remove the red cap from the filter.

5.Lubricate the O-ring with food-grade vegetable oil.

6.Line up the cartridge ears so it can be inserted into the filter head. The unlocked symbol will line up with the indicator line that is molded into the light shield area. Rotate the cartridge into the head. Twist the cartridge 1/4 turn clockwise to lock it into place. You will feel a stop and the locked symbol should now be lined up with the indicator line.

7.Dispense water through the dispenser for 10 minutes.

8.Carefully check for leaks.

Replacing the Filter Cartridge

1.Twist the filter cartridge 1/4 turn counterclockwise (as viewed from the bottom) so that ears on the cartridge are able to disengage from the head. The unlocked symbol will be lined up with the indicator line that is molded into the light shield area. Twist gently until the cartridge is free from the head, but DO NOT pull. Avoid tipping the cartridge to prevent spillage. Dispose of the used cartridge.

2.Carefully remove the replacement filter from its packaging. (Read the label carefully to be sure you have the correct replacement filter cartridge).

3.Follow steps 3 through 8 under Initial Filter Cartridge Installation.

 

 

 

 

Dual

Cool

 

 

 

 

REFRIGERATOR

2

MID

8

3

4

5

6

7

0

1

MID

9

10

OFF

FREEZER

 

 

 

MOLDED - IN LINE

ON HOUSING LINES

UP WITH INDICATORS

ON LABEL

PuriClean™

WATER FILTER

Part No. 078406-00x

TO I N SERT

TO REMOVE

Note: Filter life may be affected by abnormal feed water conditions or unusual incidents such as hydrant flushes, reservoir turnover or varying local water conditions.

Periods of Non–Use

If the refrigerator has been out of use for more than 2 weeks (ie: placed in storage or has been moved), the filter should be replaced when the refrigerator is put back into service.

Special Notices

It is essential that operation, maintenance and filter replacement requirements be carried out as scheduled. This product is for cold-water use only.

Do not use with water that is microbiologically unsafe, or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected water that may contain filterable cysts.

For your own knowledge and safety, it is recommended that your water quality be periodically tested.

The contaminants or other substances removed or reduced by this water treatment system are not necessarily in your water. The feed water connection must conform to applicable plumbing codes.

Notes:

Leave the refrigerator door open while removing and installing filters or plugs; this will prevent water from flowing through the system and running into the fresh food compartment.

A newly installed water filter cartridge may cause

water to temporarily spurt from the dispenser.

12