Maytag MSD2422GRQ, MSD2422GRW, MSD2432GRQ, MSD2432GRW, MSD2433HEW, MSD2434GEQ, MSD2434GEW, MSD2436GRQ, MSD2436GRW, MSD2448DRQ, MSD2448DRW, MSD2454FRQ, MSD2454FRW, MSD2454GRQ, MSD2454GRW, MSD2456DEB, MSD2456DEQ, MSD2456DEW, MSD2456GEB, MSD2456GEQ, MSD2456GEW, MSD2458GEB, MSD2458GEQ, MSD2458GEW, MSD2654FRQ, MSD2654FRW, MSD2654GRQ, MSD2654GRW, MSD2656DEB, MSD2656DEQ, MSD2656DEW, MSD2656GEB, MSD2656GEQ, MSD2656GEW, MSD2722GRQ, MSD2722GRW, MSD2732GRQ, MSD2732GRS, MSD2732GRW, MSD2734GEQ, MSD2734GEW, MSD2735GRB, MSD2735GRQ, MSD2735GRS, MSD2735GRW, MSD2736GRQ, MSD2736GRW, MSD2737GRB, MSD2737GRQ, MSD2737GRS, MSD2737GRW, MSD2754FRA, MSD2754FRQ, MSD2754FRW, MSD2754GRQ, MSD2754GRW, MSD2756DEB, MSD2756DEQ, MSD2756DEW, MSD2756GEB, MSD2756GEQ, MSD2756GES, MSD2756GEW, MSD2757DEB, MSD2757DEQ, MSD2757DEW, MSD2758DRB, MSD2758DRQ, MSD2758DRW, MSD2758GEB, MSD2758GEQ, MSD2758GEW, MSD2957DEB, MSD2957DEQ, MSD2957DEW, MSD2957GEB, MSD2957GEQ, MSD2957GEW, MZD2752GRB, MZD2752GRQ, MZD2752GRS, MZD2752GRW, MZD2766GEB, MZD2766GES, MZD2766GEW, MZD2768GEB, MZD2768GEQ, MZD2768GEW Fresh Food Compartment, Tempered Glass Cantilever Shelves, Spill-Catcher™ Shelves (select models), Elevator, Shelf

Interior Features

Fresh Food Compartment

Tempered Glass Cantilever Shelves

These shelves are adjustable so the refrigerator interior can be customized for varying food storage needs.

To remove a shelf: Unload. Lift up the rear of the shelf slightly, pull the shelf straight out.

To move a shelf to a different position: After removing, tilt up the front edge of the shelf. Insert the hooks into the desired openings and let the shelf settle into place. Be sure the shelf is securely locked at the rear.

Spill-Catcher™Shelves (select models)

Spill-Catcher™shelves have a spill retainer edge to contain spills and make cleanup easier.

Some Spill-Catcher™shelves feature the Easy Glide slide-out feature. To slide out, grasp the front of the shelf and pull forward. Push the shelf in to return to original position.

WARNING — Never attempt to adjust a shelf that is loaded with food (except in the case of the Elevator™ shelf).

Elevator™ Shelf (select models)

The Elevator™ shelf is equipped with a spill-retaining edge and the Easy Glide slide-out feature. It can be adjusted up or down without unloading. To slide out, grasp the front of the shelf and pull forward. Push the shelf in to return to original position.

To adjust the Elevator™ shelf: Pull out the knob on the crank handle. Rotate the crank clockwise to raise the shelf, and counterclockwise to lower the height of the shelf.

To remove: To remove the Elevator™ shelf for occasional cleaning, completely unload the shelf and pull the shelf forward. When the shelf stops, press up on the tabs located underneath its outside edges, then continue pulling forward, clear of the frame.

To replace: Align the shelf to the frame and push it all the way back. It is not necessary to press up on the tabs for reinstallation.

In ordinary use, the Elevator™ shelf frame assembly does NOT require removal. Though unlikely, and not recommended, the correct removal procedure is as follows:

•Unload the shelf completely.

•Slide the shelf forward about two inches and manually move the two rear latches toward the shelf center.

•While supporting the entire shelf and frame from underneath, lift slightly and rotate the assembly approximately 30° to allow the rear mechanism to clear the vertical rear side rails.

•The entire assembly can then be moved forward and clear of the refrigerator compartment.

•To reinstall, reverse the removal procedure. Be sure the shelf is in a level position. When the sliding shelf is pushed to the rear, it will reposition the rear latches to their correct operating position.

style may vary