Before You Call
Check these points if your refrigerator...
Won’t runRuns too long/ too frequentlyNoisy operationOdor in cabinetWarm air from cabinet bottomCabinet vibratesMoisture on inside cabinet wallsExcessive moisture in or around crisper

No temperature readout in the ClimateZoneTechnology (select models) drawer display

ClimateZonetemperature readout is not within target rangeRefrigerator or freezer compartment too warmRefrigerator compartment too coldSizzling sound in freezerVisible glow in the freezer ventsFreezer not freezing properly

Water Filter Change Reminder light (select models) comes on when the filter bypass is in place

Ice cubes evaporateAutomatic ice maker not operatingFront cabinet surface warm to the touchIce dispenser not operatingWater dispenser not operating

the temperature control turned to “Off”

the power cord not plugged in

no power at the electrical outlet

the circuit breaker tripped or the house fuse blown

refrigerator is in automatic defrost

modern refrigerators are larger and run colder, which requires more running time to provide more stable temperatures

prolonged door openings

the base grille blocked

too many door openings

the door not sealing (due to a package or a container holding door open)

warm room temperature

the cabinet not level

a weak floor

odor producing foods should be covered or wrapped

the interior needs cleaning

normal air flow for condenser circulation

the cabinet not level

a weak floor

can occur during hot, humid weather with frequent or prolonged door openings

door not closed properly

food not wrapped properly

hot, humid weather

the normal setting has been chosen

the drawer has not been opened for four weeks

for best results, refrigerator and freezer controls should be set at the mid (5) levels

After drawer openings, the addition of a new load or changing settings, the readout may vary. The temperature will recover in a short period of time.

the refrigerator or freezer control set too warm

prolonged door openings

the refrigerator control set too cold

a normal sound caused by defrost water dripping on defrost mechanism

the appearance of a red glow or reflection is normal during the defrost cycle

products with high sugar content may not harden completely when frozen (ice cream, concentrated juice, etc.)

adjust freezer control to a colder setting

This is normal. The control will count down 12 months or 416 gallons whether the filter or the filter bypass is in place. Reset the light (see pg. 11)

cold air moving over the ice cubes causes shrinkage, especially with limited usage. This is normal

the stop arm in OFF (up) position

the water supply turned off

the water pressure too low

the freezer too warm

special design to limit condensation during periods of high humidity

ice jam in the dispenser

ice maker not operating

lock switch on (see page 11)

water supply turned off

water pressure too low

lock switch on (see pg. 11)

NOTE: For further assistance contact Maytag Appliances Sales Company, Maytag Customer Assistance: U.S. 1-800-688-9900 or Canada 1-800-688-2002

18