MicroNet Technology MaxNAS Chapter 6- Troubleshooting

MaxNAS Owner’s Manual 55

• Read this User’s Guide carefully. Follow the correct procedure when setting up the device.

• Additional application software may have been included with your drive. Please review the

documentation included with this software for information on the operation and support

of this software. The documentation can usually be found in an electronic format on the

included CD.

• Always operate your drive on a steady, level surface. Do not move the unit while it is turned on.

• Plug your drive into a grounded electrical outlet. The use of “ground-defeating” adapters

will cause damage not covered by your warranty.

• Do not open your MaxNAS or attempt to disassemble or modify it. Never insert any metallic

object into the drive to avoid any risk of electrical shock, ﬁre, short-circuiting or dangerous

emissions. If it appears to be malfunctioning, please contact MicroNet Support.

• Do not power off the MaxNAS from the power button, as it may cause data loss.

• Do not expose the MaxNAS to temperatures outside the range of 5°C (41°F) to 45°C (104°F).

Doing so may damage the drive or disﬁgure its casing. Avoid placing your drive near a

source of heat or exposing it to sunlight (even through a window.)

• Never expose your device to rain, or use it near water, or in damp or wet conditions. Doing

so increases the risk of electrical shock, short-circuiting, ﬁre or personal injury.

• Always unplug the hard drive from the electrical outlet if there is a risk of lightning or if it

will be unused for an extended period of time.

• Don’t place the drive near sources of magnetic interference, such as computer displays, televisions

or speakers. Magnetic interference can affect the operation and stability of your MaxNAS.

• Do not place heavy objects on top of the drive or use excessive force on it.

• Never use benzene, paint thinners, detergent or other chemical products to clean the outside

of the MaxNAS. Instead, use a soft, dry cloth to wipe the device.

6-Troubleshooting

Chapter 6- Troubleshooting