3-Administering the MaxNAS
2.2.5 Delete RAIDSet
To Delete a RAIDset, Select the desired RAIDSet and click 
on the RAID information screen (see above, section 2.2.) The RAID Configuration page will appear. Click on 
and confirm the operation in the following confirmation dialog.
2.2.6 Space Allocation
To control space allocation for Target USB and iSCSI volumes, Select the desired RAIDSet and click Space Allocation on the RAID information screen (see above, section 2.2.) The RAID Information and Volume Allocation List windows will appear. The Volume Allocation List displays the space allocated for Target USB and iSCSI volumes on the current RAID volume. Here you may create, modify, and delete target volumes.
Allocating Space for Target USB Volume
To allocate space for a Target USB volume on
the current RAID volume, click Target USB . The Create Target USB Volume screen appears. Designate the percentage that should be allocated to the Target USB volume by selecting the appropriate percentage from the Allocation dropdown. Click OK to create the Target USB volume. The Target USB volume will appear to a host connected via the USB type “A” target mode port on the back of the unit, and will be recognize as an unformatted disk when initially connected. Since the space allocated resides on the RAID, it will enjoy all performance and fault tolerance features afforded by the MaxNAS.
Allocating Space for iSCSI Volume |
|
|
|
| |
To allocate space for an iSCSI volume on the current RAID volume, click |
| iSCSI Target | . | The “Create | |
|
|
| OK |
| confirm. |
iSCSI Volume” screen appears. Enter the values as listed below, and click |
| to | |||
ID of current RAID volume.
Percentage and amount of available space on current RAID volume.
Percentage and amount of space allocated to Target iSCSI volume.
Enable or Disable the iSCSI Target service.
Name of the iSCSI Target (used for stackable host service)
Select the current year from the dropdown.
Select the current month from the dropdown.
CHAP security authentication (on or off)
CHAP Security: Username.
Enter a password.
Reenter the chosen password
MaxNAS Owner’s Manual | 23 |
