Minicom Advanced Systems 5UM7017 2. Pre-installation guidelines

AccessIT
10
2. Pre-installation guidelines
Prepare a list of all AccessIT system components. You will need this information
to configure the system.
Appendix A on page 134 contains 2 lists of the details you need to prepare for
Minicom KVM/IP devices and PX units (not PX Serial). Photocopy or print out
Appendix A. For other access services see section 2.1 below.
The lists should include the IP device name and MAC address, KVM switch and
the Target details.
For each Target, list:
· A unique and clearly identifiable name
· The operating system
· Non-default mouse settings. Default mouse settings do not need to be
listed
Note! For Windows XP and later
(Relevant to all IP devices except PX USB)
For Windows XP and later deactivate Enhanced pointer precision. To do so:
From the Control Panel select Printers and Other Hardware. Click the Mouse
icon. The Mouse Properties box appears. See Figure 2. Select the Pointer Options
tab.
Figure 2 Pointer tab
The Motion section slider bar must be in the center, and the Enhanced pointer
precision checkbox must be unchecked. Click OK to save changes.