AccessIT
120
Figure 111 Relative Mouse Settings
Figure 112 Absolute Mouse Settings
17.13.1 Relative/Absolute Mouse Position/Apple Macintosh
Absolute Mouse Position and Apple Macintosh are only relevant for PX USB
KVM/IP devices (see section 17.13.2 below). All other KVM/IP devices must have
Relative Mouse Position selected - which is the default.
17.13.1.1 Relative Mouse Position
1. From the drop down menu, select the Target’s Operating system. Instructions
and sliders appear.
2. Follow the instructions and set any relevant sliders to the same values as set in
the Target’s Mouse Properties window.
3. Click OK to save the settings.
2 examples!
For Windows XP. Go to the Mouse settings on the Target and uncheck Enhance
pointer precision.
For Windows 2000. If Mouse Properties were ever changed for the Target – even if
they have been returned to their original state - uncheck default .
Click OK. The mouse pointers should be synchronized.
17.13.1.2 USB
The USB option in the Mouse Settings box is available for USB to PS/2 adapters,
RICC/ROC USB, X-RICC USB and Phantom Specter USB and for unsupported
operating systems and SUN Solaris. Use this option if you are sure of the custom
acceleration algorithm you are using, or have been informed so by customer
support.