Minicom Advanced Systems 5UM7017 - page 32

USER GUIDE
31
7.1.1 Default access service
You can set any of the access services to be the default service. This means that the
service will be used to access the Target by default when selecting the Target by
clicking the Target name. To access the Target via a different service, the service
must be selected. To set a service as the default, display the service as explained
below and select the Set as Default Service checkbox – circled in Figure 23.
7.1.2 Minicom KVM/IP
KVM/IP Device / Port number: Assign the IP device and KVM switch port
number (where relevant) to which this Target is physically connected.
To do so:
1. Click . The Assign Device window appears, see Figure 24.
List of device types in
the system
Figure 24 Assign Device window
2. From the list, expand the device type the target is connected to and select the
actual device the target is connected to, see Figure 25.
Actual IP device the
Target is connected to
List showing port
numbers of KVM switch
attached to IP device
with assigned Targets. A blank space means
there is no currently
assigned Target
A tick means there is a
Target assigned to this
port
Target name as
configured by
Administrator
Figure 25 Device and Targets
3. Double-click the port number row to which the Target is connected. The name
of the target appears in that row.
4. Click Save. The changes are saved and the New Target page reappears
showing the assigned IP device and port number, see Figure 26.