USER GUIDE
65
Note! AccessIT built-in VMware server supports VMware server 1.x only. See the
KVM.net II support website for VMware server 2.x and ESX Access Services.
Windows/Linux tab Select the operating system by clicking the appropriate tab.
For each system the default VMware Application Path is different.
Description: - Description of the access service - VMware Server.
Virtual Server Host or IP: - Type the Host/IP of the VMware Server resource.
Application - vmware.exe is the application used for VMware Server access. The
VMware Server Client application can be obtained from:
http://www.vmware.com/download/server/
Application Path: - VMware Server console must be installed on all client
computers, preferably in the same path. In the Windows default path
%ProgramFiles%\VMware\VMware Server Console – see Figure 62 – the
application could be in any drive in the Program Files\VMware\VMware Server
Console folder. See the General notes above about variables.
Virtual Machine Path - Type the Virtual Machine Path on the VMware Server.
Login Method:
· Prompt for Credentials this means the VMware Server Console login
appears and you login manually.
· Use AccessIT Credentials this means AccessIT logs into VMware Server
Console with the currently logged user credentials. Ensure that VMware
Server is configured to recognize the same User Name and Password.
· Use the Following Credentials Where the User Name and Password are
different for AccessIT and VMware Server, select this option. User Name
and Password fields appear. Type the VMware Server User Name and
Password. AccessIT logs into VMware Server using this User Name and
Password.
10.3.11 New Access Services
You can add other access services. If the new service has an executable application
the application must be installed on all client computers, preferably in the same
path.
Add new Access Services as follows:
1. From the Access Services page click . The New Service
page appears, see Figure 63. This page is a template for configuring a new
access service.