USER GUIDE
55
Note! (Relevant to all IP devices except PX USB) For Windows XP and later. Go
to the Mouse settings on the Target and uncheck Enhance pointer precision.
USB Converter - When a KVM/IP device connects to a server via a USB to PS/2
adapter, or RICC/ROC USB, or X RICC USB or Specter USB, select the USB
Converter checkbox. The USB conversion affects the mouse emulation and the
USB Converter helps to synchronize the mouse.
10.3 Configuring other Access Services – introduction The template values are automatically applied to new Targets that have the Access
Service assigned to them.
For example, there is a default value for the application path of an access service. If
this is suitable, ensure that all users have the access service application in the same
path on their computer. Where a user computer has a different path, a prompt
appears on the user’s computer asking the user to browse for the Access Service
application on his computer.
Note! Access Service settings can also be changed if necessary, for individual
Targets, explained on page 68.
10.3.1 Access Services default values
Below are the factory included access services and their default values. If these
values are not suitable you can change them. If an Access Service has an
executable application, the application must be installed on all client computers.
10.3.2 General note about application paths
When inputting the application path into the AccessIT client interface you can
include variables. For example for an access service called ABC service, by typing
“%ProgramFiles%\ABCservice” the application could be installed in any drive on
client computers in the Program Files\ABCservice folder.
The following variables in the application path can be used:
· %ProgramFiles% - Program Files folder
· %SystemRoot% - Windows folder
10.3.3 Minicom PX Serial
Click Minicom PX Serial. The Minicom PX Serial settings appear, see Figure 52