Minicom Advanced Systems 5UM7017 - page 96

USER GUIDE
95
Destination path - enter the remote computer name and shared folder or its IP
address and shared folder using the following path syntax:
//computer name/share - e.g. //gx270n-comp163/backup
or
//computer IP address/share - e.g. //192.168.2.71/backup
Note: Netware shares are not supported.
For computer name resolving the DNS server IP address must be set in the Unit
Maintenance/Network tab.
To validate the Destination path, click .
Backup schedule – Select the checkbox to activate the backup schedule.
Select time - Select the time (hour and minute) that the backup should initiate.
Select days - Select which days the backup should be performed.
Click to save the settings.
The scheduled times work according to the internal clock of the AccessIT Manager
appliance.
To perform a manual backup at any time, click . The Backup
file is stored in the destination path.
15.1.2 Restoring database backup
To restore the AccessIT database from a previously created backup file:
1. Click the Restore tab, the following appears.
Figure 87 Restore tab
2. Browse to locate the backup file.
3. Load the backup file.
4. Click . After the process finishes, you are logged out from the
AccessIT web interface, login again. AccessIT system is ready to use.