Menu item
PS SmartSwitch
On
Off
NPA Mode
Off
Auto
Network Buffer
Disabled Auto
3K to <maximum size allowed>
Mac Binary PS
On
Off
Auto
Network Setup
Description
Sets the printer to automatically switch to PS emulation when a print job requires it, regardless of the default printer language
Notes:
•On is the factory default setting.
•When the Off setting is used, the printer does not examine incoming data.
•When the Off setting is used, the printer uses PCLemulation if PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PCL SmartSwitch is set to Off.
Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol
Notes:
•Auto is the factory default setting.
•Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is updated.
Sets the size of the network input buffer
Notes:
•Auto is the factory default setting.
•The value can be changed in 1K increments.
•The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
•To increase the maximum size range for the Network Buffer, disable or reduce the size of the parallel and USB buffers.
•Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is updated.
Sets the printer to process Macintosh binary PostScript print jobs
Notes:
•Auto is the factory default setting.
•The Off setting filters print jobs using the standard protocol.
•The On setting processes raw binary PostScript print jobs.
Reflects the network setup for your printer
Network Card menu
Menu item
View Card Status
Connected
Disconnected
View Card Speed
Description
Allows you to ascertain whether the Network Card is connected.
Reflects the speed of a currently active network card.
Understanding printer menus
86
