Load manual feeder with <x>
Try one or more of the following:
•Load the specified paper in the manual feeder.
•Cancel the current job.
Load <src> with <x>
Try one or more of the following:
•Load the tray or other source with the correct paper type and size.
•Cancel the current job.
Not Ready
Press and release either or
to return to the Ready state.
Power Saver
The printer is saving power while it waits for the next print job. Send a job to print to take the printer out of Power Saver mode.
Programming Engine Code DO NOT POWER OFF
Wait for the message to clear.
Programming System Code DO NOT POWER OFF
Wait for the message to clear.
Ready
The printer is ready to receive print jobs.
Restoring Factory Defaults
Wait for the message to clear. When factory default settings are restored, all downloaded resources in the printer memory are deleted. This includes fonts, macros, and symbol sets.
Remove paper from standard output bin
Remove the stack of paper from the standard exit bin.
Understanding printer messages
94