DISPLAY SELECTION
Vertical Display
The horizontal/vertical operation automatically changes the orienta- tion of the navigation display, when the camera’s position is changed to a vertical or horizontal position.
•Only the detailed and
•If you want the display to remain in the horizontal orientation, regard- less of the camera’s position, choose Custom
Operation Display
The operation display appears whenever you operate a camera dial or function that is not currently on the display. The new settings will appear for 5 seconds. When the detailed display has been select- ed, the operation display will not appear.
Example below shows the large icon display. When continuous
•During the display’s 5 second period, pressing the
•To cancel this display, select Custom
DISPLAY (WHEN UPPER PART TURNS BLACK)
When the 
, 1, 2, or 3 is selected, the upper part turns black.
When the dial is set to | or to one of the memory set- |
| |
tings, the upper part of the display turns black and the position of |
| ||
the dials and levers may not match the actual camera control. The | DISPLAY | ||
camera recalls the | |||
| |||
selected memory function, and these are correctly shown on the |
| ||
navigation display. |
|
| |
Example 1: | NAVIGATION | ||
(Normal) |
| ||
|
| ||
Example 2: 
, full- auto mode. Top part of display has
turned black.
Example 3:
42 | 43 |
