Minolta Dynax 7, Minolta, Maxxum manual Press the ADJ button

DATE/TIME IMPRINTING

2. Press the ADJ button.

• The date adjust win- dow appears and the year is high-lighted.

3.Turn the front control dial to selected the item you wish to change.

4. Turn the rear control dial to change the value.

5.Repeat steps 3 and 4 until the correct date/time is set.

6.After all items are set, press the shutter-release button partway down. The normal display returns.

When appears at the top right side, it is possible to use the focus-area selector instead of the dial.

If you press the right/left side of the selector, the high-lighted area moves.

If you press the top/bottom side of the selector, the high- lighted value changes.

•Display returns to normal when you press the shutter-release button partway down.

After the camera batteries have been installed for two days, a second battery (non-accessable) will have been charged. This second battery will be able to provide power to retain the date/time settings for approximately 6 months should the cam- era’s batteries be removed. After that, this message appears and

the date/time information will not be imprint- ed, and must be set. See pages 121-122 for instructions for setting the date and time.

ADDITIONAL FEATURES

122 123