USING THE BUILT-IN FLASH

Flash Range

The range of the built-in flash depends on the speed of the film and the selected aperture. Make sure your subject is within the flash range specified in the table below.

Aperture

ISO 100

ISO 200

ISO 400

f/2.8

1.0 ~ 4.3m

1.0 ~ 6.1m

1.0 ~ 8.6m

(3.3 ~ 14.1 ft.)

(3.3 ~ 20.0 ft.)

(3.3 ~ 28.2 ft.)

 

 

 

 

 

f/3.5

1.0 ~ 3.4m

1.0 ~ 4.8m

1.0 ~ 6.8m

(3.3 ~ 11.2 ft.)

(3.3 ~ 15.7 ft.)

(3.3 ~ 22.3 ft.)

 

 

 

 

 

f/4

1.0 ~ 3.0m

1.0 ~ 4.2m

1.0 ~ 6.0m

(3.3 ~ 9.8 ft.)

(3.3 ~ 13.8 ft.)

(3.3 ~ 19.7 ft.)

 

 

 

 

 

f/5.6

1.0 ~ 2.1m

1.0 ~ 3.0m

1.0 ~ 4.3m

(3.3 ~ 6.9 ft.)

(3.3 ~ 9.8 ft.)

(3.3 ~ 14.1 ft.)

 

 

 

 

 

Lens Shadowing

Lens shadowing occurs when the lens or lens hood blocks part of the output from the built-in flash. Lens shadowing appears as semi- circular shaded area at the bottom (horizontal) or side (vertical) of your image.

Make sure you are at least 1m (3.3 ft.) from your subject when using the built-in flash.

Remove the lens hood before using the built-in flash.

Lens shadowing may occur with the following lenses at shorter focal lengths.

AF Zoom 17-35mm f/3.5G

AF Zoom 28-70mm f/2.8G

AF Zoom 28-85mm f/3.5-4.5

AF Zoom 28-135mm f/4-4.5

• The built-in flash can not be used with the following lenses:

AF 300mm f/2.8 (APO tele) AF 600mm f/4 (APO tele) AF 300mm f/4 (APO tele)

REWINDING THE FILM

Automatic RewindOPERATION The film is automatically rewound after the last frame is exposed.

1. Wait until the film is completely rewound.

BASIC • Do not open the back cover until this

message appears in the navigation display. Never use force.

2. When the film is completely rewound, open the back cover and remove the film.

If the manual rewind button is pressed while the film is rewinding, the rewind speed will change.

32

33

Page 17
Image 17
Minolta Dynax 7 Rewinding the Film, Flash Range, Aperture ISO, Lens Shadowing, Wait until the film is completely rewound