Quick Operation, Viewfinder | Minolta Maxxum, Minolta, Dynax 7

NAMES OF PARTS

Viewfinder

Spot-metering area (75)

Local focus area (56)

Spot-focus area (55, 56)

Wide focus frame

Flash-compensation indicator (103)

Wireless/Remote flash indicator (114)

Manual-focus indicator (48)

AEL indicator (81, 102)

Exposure-mode indicator

Frames-remaining counter (26)

Aperture display Meter index

Shutter-speed display

Focus signals (28) Metering-mode indicator (75) High-speed-sync indicator(110)

Flash indicator (31)

QUICK OPERATION

1. Insert the batteries.

• The camera uses two CR123A batter- ies.

2. Attach a lens.

• Align the red marks, then turn it gen- tly clockwise until it clicks.

3. Turn the camera on.

• Turn the main switch to ON.

4. Load the film

• Align the film-tip with the red mark, then close the back cover.

Page 7

Image 7

Minolta Maxxum, Minolta, Dynax 7 manual Quick Operation, Viewfinder

Contents

Page For Proper and Safe USE Table of Contents Appendix Camera Body Names of Parts Top Data Panel Control Panel Navigation Display Viewfinder Quick Operation Down If using a zoom lens, rotate the zooming ring to frame yourSet the camera for automatic operation Subject as desired Door Installing the BatteriesClose the battery-chamber door Batteries Removing the Lens Battery Condition IndicatorsLens Attaching the Lens Slide the back-cover release and open the back cover Loading FilmInsert film cartridge into the film chamber Close the back cover Holding the Camera Handling the CameraPressing the Shutter-Release Button Taking Pictures in FULL-AUTO Turn the main switch to onRaise the built-in flash Method Segment metering Full-Auto Basic Settings Focus is confirmed FocusingFocus Signals Focus Lock If your subject is near a very bright object or area Using the BUILT-IN FlashFlash Signals Special Focus Situations Lens Shadowing Rewinding the FilmFlash Range Aperture ISO Gently press the manual-rewind button Manual Rewind Exposure-history display Display SelectionDetailed display Large icon display Meter-index display Large Icon Display Detailed Display Exposure-History Display Meter-Index Display Operation Display Vertical Display Display Contrast Display Brightness and ContrastDisplay Illumination Press the navigation display illu- minator Single-Shot Autofocus S Focus ModeAutomatic Autofocus a Continuous Autofocus C AF Power Zoom and xi Series Lenses Turn the focus-mode switch to MFManual Focus MF AF to MF AF/MF Control ButtonMF to AF Focus Area Smooth Focusing Wide Focus Area Set the wide/local focus-area switch to wideWhile pressing either the focus-area selector or the spot Local Focus Area Set the wide/local focus-area switch to localPicture AF Illuminator How to Lock the Local/Spot Focus AreaTurn the wide/local focus-area switch to lock How to Lock the Wide Focus Area Comparison of full-auto mode to P program mode While pressing the exposure- mode dial lock-release buttonMode Turn the rear control dial to change the aperture Mode FlashPA/PS Mode Turn either control dial to select the aperture Aperture Control Turn either control dial to select the shutter speed Shutter Control Metering in M Mode Select a desired shutter speed and aperture Manual Shift Spot Metering Turn the metering-mode switch toSelectable Metering Segment Honeycomb-Pattern Metering Exposure Compensation Center-Weighted Average Metering Set the exposure-compensation dial to the edge of the 1/2EV Changing to 1/3 IncrementsIncrement ie +/-3.0EV Meter Index Button Automatic Exposure Lock AELWhile pressing the AE-lock button, recompose the scene Spot Metering Meter Index When AE-Lock Button is Pressed Brightness-Distribution Display Turn either control dial to set the desired ISO value Setting the ISO ManuallyOpen the control-panel door and press the ISO button Drive Continuous Open the control panel door and press the adjust button SELF-TIMER 0.5, 0.7, 1.0 EV Exposure BracketingTurn the front control dial to set the bracketing increment Normal -0.5EV +0.5EV -1.0EV +1.0EV Turn the drive-mode lever to Number Exposures AdjustmentMultiple Exposure Compensate the exposures as follows Flash Flash Mode Switch Rear Flash Sync RED-EYE Reduction Flash Compensation SLOW-SHUTTER Sync Flash Bracketing Accessory Flash Pre-flash metering Flash Metering HIGH-SPEED Sync Attach the 5600HSD, 5400HS or 3600HSD and set it to HSS mode Turn either control dial and select normal wireless or ratio Normal Flash Wireless/Remote Flash HSS Detach the accessory flash, then raise the built-in flash Switching Between Normal WL Flash and Ratio WL Flash Press the AE-lock button to test fire the accessory flashWait until both flash units are fully charged PC Terminal Additional Features DATE/TIME Imprinting Setting the Date/TimeOpen the control-panel door and press the Date button Press the ADJ button Changing the Format Using Eye-StartSlide the eye-start switch to on Turn the main switch to on DATE/TIME Imprinting EYE-START Cover the viewfinder with the eyepiece cap Time Exposures Bulb Press the depth-of-field preview button DEPTH-OF-FIELD Preview SETTING/CANCELLING the Audio Diopter Adjustment