8050D N/B Maintenance
1.Engineer Hardware Specification
1.1Introduce
The MiTAC 8050D model is designed for Intel Banias processor with 400MHz FSB with Micro-FCPGA package. It can support Banias 1.5G ~ 1.9GHz/Dothan 2.0GHz and above.
This system is based on PCI architecture and is fully compatibleDocumentwith IBM PC/AT specification, which has standard hardware peripheral interface. The powerSecretmanagem complies with Advanced Configuration and
Power Interface (ACPI) 2.0. It also provides easy configuration through CMOS setup, which is built in system BIOS software and can be pop-up by pressing F2 key at system start p or warm reset. System also provides icon LEDs to display system status, suchMiTacas AC Power indicator, Battery Power indicator, Battery status indicator,
The memory subsystem supports two xpansion DDR SDRAM slot with unbuffered PC1600/PC2100 DDR-
HDD,CD-ROM, NUM LOCK, CAP LOCK, SCROLL LOCK, RF on/off Card Reader indicator. It also equipped with LAN, 56K Fax MODEM,Confidential3 USB port, S-V deo nd audio line in/out , external microphone function.
SDRAM.
The Montara-GME GM H H st Memory Controller integrates a high performance host interface for Intel Banias processor, a high performance 2D/3D Graphic Engine, a high performance memory controller, Digital Video port (DVOB & DVOC) interface, and Intel Hub interface Technology connecting with Intel 82801DBM ICH4-M.
The Intel ICH4-M integrates three Universal Serial Bus 2.0 Host Controllers Interface (UHCI), the Audio Controller with AC97 interface, the Ethernet includes a 32-bit PCI controller, the IDE Master/Slave controllers, and Intel Hub interface technology.
