8050D N/B Maintenance

2.2.8 DDR-SDRAM

Disassembly

1.Carefully put the notebook upside down. And remove the battery pack. (See section 2.2.1 disassembly)

2.Remove two screws fastening the DDR compartment cover to access the SO-DIMM socket. (Figure 2-16)

 

Document

 

Secret

 

 

MiTac

 

Confidential

Figure 2-17 Remove the SO-DIMM

Figure 2-16 Remove the cover

 

3. Pull the retaining clips outwards (￿) and remove the SO-DIMM (￿). (Figure 2-17)

Reassembly

1. To install the DDR, match the DDR's notched part with the socket's projected part and firmly insert the SO-DIMM into the socket at 20-degree angle. Then push down until the retaining clips lock the DDR into position.

2. Replace two screws to fasten the DDR compartment cover.

3. Replace the battery pack. (See section 2.2.1 reassembly)

56