8170 N/B MAINTENANCE

The “HDD Timing” item sets the data transmit mode of the hard drive. The default setting is Ultra DMA-33 The “I/O 32 bit transfer” item, if enabled, allows you to have better data transfer rate. This effect is more noticeable under DOS system. The default setting is Enabled

The “HDD Block transfer” item, if enabled, allows you to use hard disk with large capacity. The default setting is Enabled

@Virus Alert

The “Virus Alert” item, when enabled, gives warning messages if the hard disk boot sector (partition table) has been changed

When this item is selected, no submenu will display. A check mark (√ ) indicates Enabled; an underline (_) indicates disabled

The default setting is Disabled.

1.5.3.7 Components

Components

COM

Ports

>

LPT

Port

 

√PS/2 Mouse Port

Legacy Usb

>

√Keyboard Numlock Keyboard Repeat >

@COM Ports

The “COM Ports” item sets the settings of COM Port A and B. When this item is selected, the submenu will display as shown below:

57