8170 N/B MAINTENANCE

Video Timeout :

The “Video Timeout” item sets the time-out period for the monitor to power down if it is not in use during the set period. The monitor will power up again when any key is pressed.

The available options are 30 Sec, 2 Min, 5 Min, 10 Min, 15 Min, 30 Min and Always On.

Disk Timeout:

The “Disk Timeout” item sets the time-out period for the hard disk to power down if it is not in use during the set period. The hard disk will power up again when next accessed.

The available options are 30 Sec, 1 Min, 1.5 Min, 2 Min, and Always On.

Global Timeout:

The “Global Timeout” item sets the time-out period for initiating Standby mode. Whenever the system. begins idling, the Power Saving starts the time-out for the Standby mode. If the system has been idled for the specified time-out period, system will enter Standby mode.

If Standby mode is in effect, several system subsystems go into standby or off mode so that system power will be reduced. The system will wake up from Standby mode when system activity is detected.

The available options are 1 Min, 2 Min, 4 Min, 6 Min, 8 Min, 12 Min, 16 Min, and Always On.

Monitor Video Activity

The “Monitor Video Activity” item sets if the video activity will be monitored. If enabled, any activity on the screen (such as showing a movie title) will prevent the monitor from powering down.

The available options are Enabled and Disabled.

64