Mitsubishi Electronics DX-TL2500U operation manual Major operations and their functions

Major operations and their functions

■Front View

1 2 3 4 5 6 7

SPLIT/

SEQUENCE

ZOOM

0

DIGITAL RECORDER DX-TL2500

OUTPUT B TIMER PRE ALARM M-DET EMERGENCY ACCESS

						CLEAR/	ENTER/
						REW	FF
10	11	12	13	14	15	16	REC/STOP

ARCHIVE

COMLOCK

8 9 10 11 12 13 14 15 16

1. ZOOM button

Pressing this button once during single screen dis- play, the screen is magnified by 100%. In the same way, pressing the button twice magnifies the screen by 200% and pressing the button three times magni- fies the screen by 400%. Pressing a camera number button (1, 2, 3, or 4) will move the magnification center point.

8. OUTPUT B indicator

Illuminates when pressing the OUTPUT B button.

9. TIMER indicator

Illuminates during timer recording or when timer re- cording is in stand-by.

10. PRE ALARM indicator

Illuminates when in pre-alarm recording mode.

2. SPLIT/SEQUENCE button

Press the button to display SPLIT16, SPLIT9, SPLIT4 screen or SEQUENCE screen setting on multiplexer functions.

3. Camera number buttons (1 to 16)

Press the button to display the image from the cam- era connected to the input.

4. SHUTTLE ring

Used to set various menus and search functions, adjusting the playback speed, and rewinding or for- warding the recording images.

5. JOG dial

Used to set various menus and search functions, forwarding or rewinding the image during playback (field-by-field).

6. REC/STOP button

Press this button once to start recording. To stop recording, press this button again for about two sec- onds. When the unit is in Timer recording the REC/ STOP button has no affect until Timer recording is exited.

11. M-DET indicator

Illuminates when the motion detection function is on.

12. EMERGENCY indicator

Flashes during emergency recording and lights when recording is completed.

13. ACCESS indicator

Illuminates during access to hard disk drive, Com- pact Flash Card or peripheral recording devices.

14.COM (COMMUNICATION) indicator

Illuminates when establishing communication with personal computer.

15.LOCK button

Pressing it with a pointed object (such as a ballpoint pen) while the MAIN switch (main power) on the rear of the unit is on, will activate the simple lock or pass- word lock. Moreover, the PASSWORD can be set on the <PASSWORD SETTING> screen. The indicator will light while the lock is active.

16. LOCK indicator

Illuminates when simple lock or password lock is on.

7. ARCHIVE button

Press the button to archive. When the button pressed for more than 1second, archive stops. The unit will not start to archive if an archive device is not con- nected.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• •••••••••••••

14