Mitsubishi Electronics DX-TL2500U MPX Display Settings, Split/Sequence, SPLIT4 Screen Setting

<MPX DISPLAY SETTINGS> (continued)

■MPX DISPLAY SETTINGS

Multiplexer setting of the <OUTPUT A> and <OUTPUT B> are referenced below.

■SPLIT/SEQUENCE

SPLIT/SEQUENCE allows selection of display modes.

Setting ( default : “ALL” )

“ALL” : Displays all split screens of 4, 9, and 16.

“SHORT” : Displays selected SPLIT9 sequential, SPLIT4 sequential, single screen sequential and SPLIT16.

When “SHORT” is selected, only the whole sin- gle screen or SPLIT16 screen selection can be used to view playback.

1.Press the SET UP button } <SETTINGS> } Select the <MPX DISPLAY SETTINGS> screen and turn the SHUTTLE ring clockwise.

•The <MPX DISPLAY SETTINGS> screen appears.

<MPX DISPLAY SETTINGS>
>>OUTPUT	A	OFF
OUTPUT	B ON/OFF
OUTPUT	B

Select “ON” in the “OUTPUT B ON/OFF” to dis- play the live monitor video of OUTPUT B on the screen. When the setting is “OFF” in the “OUTPUT B ON/OFF”, OUTPUT B does not display video.

2.Turn the JOG dial to select “OUTPUT A” or “OUTPUT B”, and turn the SHUTTLE ring clockwise.

•The <OUTPUT A> screen or the <OUTPUT B> screen appears.

<OUTPUT A>

>>SPLIT/SEQUENCEALL SPLIT4 SCREEN SETTING SPLIT9 SCREEN SETTING SPLIT16 SCREEN SETTING SEQUENCE SETTING

INTERLACEON

<OUTPUT B>

>>SPLIT/SEQUENCEALL SPLIT4 SCREEN SETTING SPLIT9 SCREEN SETTING SPLIT16 SCREEN SETTING SEQUENCE SETTING

INTERLACEON

SAME AS OUTPUT A

B> screen the same as the setting of the <OUT- PUT A> screen, turn the JOG dial to move the cur- sor to “SAME AS OUTPUT A” on the <OUTPUT B> screen and turn the SHUTTLE ring clockwise.

3.Turn the JOG dial to display the desired setting, and turn the SHUTTLE ring clockwise.

•The setting is confirmed, and flashing stops.

■SPLIT4 SCREEN SETTING

For the SPLIT4 SCREEN SETTING, 4 types of SPLIT4 screen types (a, b, c and d) can be set.

1.Press the SET UP button } <SETTINGS> } Select “OUTPUT A” (“OUTPUT B” ) in the <MPX DISPLAY SETTINGS> screen and turn the SHUTTLE ring clockwise.

•The <OUTPUT A> (<OUTPUT B>) screen appears.

2.Turn the JOG dial to select “SPLIT4 SCREEN SETTING” and turn the SHUTTLE ring clockwise.

•The <SPLIT4 SCREEN SETTING> screen appears.

<SPLIT4 SCREEN SETTING>

>>SPLIT4(a)	SPLIT4(b)
(1 ) ( 2)	( 5 ) (6 )
( 3 ) ( 4 )	( 7 ) ( 8 )
SPLIT4(c)	SPLIT4(d)
(9 ) (10)	(13) (14)
(11) (12)	(15) (16)

3.Turn the JOG dial to select the split display to set (a, b, c or d) and turn the SHUTTLE ring clockwise.

•The (most upper left) camera number reverses in color.

4.Turn the JOG dial to move to the camera number with the reversed display and turn the SHUTTLE ring clockwise.

•The background of the camera number turns red and flashes.

5.Turn the JOG dial to display the camera number to set and turn the SHUTTLE ring.

•Flashing stops.

The same camera number can be set multiple times on the split screen display. When multiple set- tings with the same camera number have been made, the same image is displayed at the camera location.

6.Repeat steps 4 and 5 to set the desired camera number.

7.When completed with setting, turn the SHUTTLE ring counterclockwise.

•Setting is confirmed and the cursor appears.

8.To set other split screen displays, repeat steps 3 ~ 7.

The <SPLIT4 SCREEN SETTING> screen can- not be exited when camera number is flashing.

To set the multiplexer setting of the <OUTPUT

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• •••••••••••• •

42