Mitsubishi Electronics DX-TL2500U Front View Inside of the door, SET UP button, Search button

■Front View (Inside of the door)

17 18 19 20 21 22

DIGITAL RECORDER DX-TL2500
SPLIT/		10	11	12
SEQUENCE
ZOOM
OUTPUT B TIMER PRE ALARM M-DET EMERGENCY ACCESS	COM			LOCK

0

13

14

15

CLEAR/	ENTER/
REW	FF
16	REC/STOP
	ARCHIVE

POWER TIMER

VIDEO OUT AUDIO OUT

COMPACT FLASH

CFC

WARNING	SET UP	SEARCH	COPY	ALARM
RESET				INTERRUPT
			MENU

OUTPUT A OUTPUT B MULTIPLEXER

PLAY DEVICE

EJECT

MAIN

ARCHIVE

COPY

STOP	PAUSE/	REV. PLAY( ) PLAY( )
	SHUTTLE HOLD

23 24 25 26 27 28 29 30 31

17. WARNING RESET button

This button is used to clear on-screen warning dis- play data.

18. SET UP button

Press this button to display the <SETTINGS> menu.

25.ANALOGUE OUT connectors

VIDEO OUT connector

Output connector for video signal (RCA pin).

AUDIO OUT connector

Output connector for audio signal (RCA pin).

19. SEARCH button

Press this button to display the <SEARCH > menu.

20. COPY button

Press this button to display <COPY> menu. This button lights when performing copy operation. Cop- ies cannot be made when the copy device is not con- nected or a card is not in the COMPACT FLASH slot.

21. ALARM INTERRUPT button

When pressing this button, the unit will not accept alarm signals or motion detection for 5 minutes. Dur- ing this time, the button will flash. This allows device set-up changes to be made without being disturbed by ALARMS. Press this button once again to cancel.

22. PLAY DEVICE button

Press this button to select PLAYBACK device.

23. POWER button

Pressing this button while the MAIN switch is on the rear of the unit is set to ON, the power turns on and the button lights. When the button is pressed again, the unit will be in stand-by and the light will turn off. When the unit is in operational transition such as booting, the button will flash and other operations are not accepted.

24. TIMER button

When pressing this button, the unit is set to timer recording/stand-by and the TIMER indicator lights. When pressing this button for more than 1 second, timer recording/stand-by is cancelled and the TIMER indicator turns off.

26. COMPACT FLASH slot

Compact Flash Card can be used for saving/loading data and menu information. When not using the slot, attach the COMPACT FLASH slot cover to prevent dust from entering the unit.

27.CFC (Compact Flash Card) indicator

Illuminates only when the CFC is selected by press- ing the PLAY DEVICE button.

28.MULTIPLEXER buttons

OUTPUT A button

When this button is pressed, the video of the cam- era is sent to OUTPUT A. Operations of the camera number buttons and the SPLIT/SEQUENCE button affects and reflects OUTPUT A.

OUTPUT B button

When this button is pressed, operation of the cam- era number buttons and the SPLIT/SEQUENCE but- ton switches the image to OUTPUT B. Please note that OUTPUT B is for live images only. Playback of recorded image is only for OUTPUT A.

To display image of the monitor connected to OUT- PUT B, set OUTPUT B to “ON” in the setting of the “OUTPUT B ON/OFF” of the <MPX DISPLAY SET-

TINGS> screen. see page 42.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Beginning

15